Starting a session created area records with no device, and the panel only ever
read the device it never set — so every "اتمام این ناحیه" came back 422 with
"دستگاه این ناحیه مشخص نیست". The backend tests passed because they sent
resource_uuid explicitly; from the UI the flow was unusable end to end.
The device now inherits from the appointment's resource, which the secretary
already chose at booking; asking the operator again is taking one decision
twice. The session screen offers a picker per area on top of that, because one
session really does run bikini on an alexandrite and underarms on a diode.
Treating without a device is allowed: botox is an injection, and requiring a
device would make clinics invent a fake resource per injection. Sending readings
with no device is still rejected — there would be no schema to validate against.
A protocol whose service has no ResourceServiceOffering rows now says so in the
tab where the manager is standing. It does not block booking: "no offering means
any resource" is a deliberate, tested rule. But silence meant the gap surfaced
only when the operator was already in front of a patient.
Also adds the live timer the spec asked for, and wires slot-suggestions into the
unbooked queue — the endpoint existed and tested green but no screen called it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Three screens, each reusing what already exists rather than inventing a parallel
look. The treatment plan lives as a tab on the service page next to categories,
because the course belongs to the service; the switch is the protocol's existence
rather than a separate boolean that could disagree with the step list. Each step
asks for days since the previous session, which is how the interval actually
works and what the form should therefore say.
The staff screens are the flow from the reference screenshots: today's sessions,
then a session where each area is started, recorded and closed on its own. Field
inputs are built from the schema the server sends per resource type, so a clinic
adding an RF device sees its own form here without a code change.
StatusBadge gains treatment session and area states rather than a second badge
component sitting beside it, and the resource type modal grows a field editor so
the operator form is configured where the device is defined.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- Add RecordNumberSettingsController for managing patient record number patterns.
- Create RecordNumberPattern entity to represent the pattern configuration.
- Implement RecordNumberPatternRepository for database interactions.
- Develop RecordNumberGenerator service for generating and validating record numbers.
- Add tests for record number generation, backfilling, and API interactions.
- Ensure proper access control for viewing and updating patterns based on user roles.
Resources never needed a branch: devices and rooms belong to the clinic
itself, and the picker always had exactly one option — a mandatory click
that decided nothing.
- `address_uuid` is now optional on resource and pool creation; when it is
missing the environment's own address is used. Clients still sending it
keep working.
- The panel no longer asks for or displays a branch anywhere: resource
form, list column and filter, pool form and column, detail row, and the
resource-first booking page.
- Availability no longer gates on `doctor_addresses.active`. That gate shut
down every device of a clinic whose address row happened to be inactive,
with a message no page in the panel could act on — no endpoint writes
that column at all.
`address_id` stays on the resource: the timezone and the tenant pair are
derived from it. It is simply no longer the user's decision.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- Add service timeline builder for appointments to manage available slots.
- Create a hook to fetch resource booking services with effective durations.
- Develop ResourceBookingSlotController to handle API requests for resource booking slots.
- Implement ResourceBookingSlotService to calculate available time slots based on resource occupancy and service durations.
- Add tests for resource appointment creation and booking slot functionality to ensure correct behavior and edge cases.
"Add appointment" while a resource tab is active now opens a booking modal for
that resource: its own services, then a time, then the responsible doctor.
It reuses the booking engine that already existed (appointment-availability →
appointment-hold → appointment-confirm) rather than adding a second path. That
engine answers service-first and returns a resource assignment per slot, so the
modal keeps only the slots where the engine actually offered this resource and
pins that role to it on hold. Showing the other slots would let an operator pick
a time that can only come back as a 409.
The responsible doctor is required because every appointment has a doctor and
confirm will not run without one; the resource records which device the work
happens on.
The read-only "منابع" timeline under the schedule is removed along with its
component and hook, which had no other consumers. GET /api/v1/resources/timeline
is untouched on the backend and now has no client.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Price lists, annual tariffs and per-branch price overrides each answered
"what does this service cost?" differently, so a single date could carry
several answers and nobody could say which one was right. Price now lives
only on ServiceItem.price_rials, edited from the services page.
- drop PriceList/PriceListItem, their repositories and the seven
/api/v1/price-list(s) endpoints; PricingController keeps only quote and
the appointment price snapshot
- drop Tariff, TariffRepository, TariffService and the two
/service-items/{uuid}/tariffs endpoints; creating or repricing a service
no longer upserts a current-year tariff
- drop price_rials from ServiceBranchOverride; the entity stays for its
duration columns, which DurationCalculator and ServiceSelectionValidator
still read
- InvoiceService reads the item price directly
- PricingEngine collapses to a single source; breakdown.sources always
reports service_item, keeping the response contract intact
- remove the price-lists admin page, its route and settings-menu entry, the
tariff modal and the service detail tariffs tab; useAppointmentInvoice
moves to its own hook file
Migration drops price_lists, price_list_items, service_tariffs and the
override price column.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The table had two date columns for one date: "تاریخ" printed the raw
1405-05-13 string in Latin digits, and the column labelled "میلادی" ran the
same day through formatDate — which returns Jalali. One date, twice, under a
label that lied. It is now a single formatted Jalali column.
The closure form used a native <input type="date">: Gregorian, an English
mm/dd/yyyy placeholder in an RTL Persian panel, and a white box in dark mode
because a native control does not follow the theme. It is the shared Persian
picker now.
That picker turned out to be a div with an onClick — no role, no tab stop, no
accessible name, and its clear button was a span. Since every page that picks
a date goes through it, it gained role/tabIndex/Enter-Space, an ariaLabel
prop, and a real button for clear. The page passes labels for the year select
and both form fields, and the global topbar search got an aria-label, which
takes the runtime accessibility probe on this page to clean.
useHolidays now returns an error, so a failed request reads as an error
instead of an empty year — previously indistinguishable.
The page had no test file; it has eight.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The three admin endpoints shipped without anywhere to call them from, so the
person who is supposed to maintain the national calendar could only do it
with curl or a console command. That is not "the director can register the
year's holidays".
/admin/national-holidays is ROLE_ADMIN only and sits under the System group
in the admin nav. The year lives in the query string, so back and refresh
return to the year being edited.
Editing takes only the title: `date` is the unique key, so moving a holiday
is really deleting one and creating another, and the form says so rather than
silently creating a duplicate. The date field is the shared Jalali picker,
which speaks Gregorian, so the page converts before POSTing the jalali_date
the API expects — and shows the converted value under the field so the user
can see what will be stored.
Deleting warns that the day leaves every clinic's calendar, because it does.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three views become two. The resource lanes were a separate tab, which meant
reading a doctor's free hour on one screen and the laser's on another and
matching them by eye — while in the resource-first model it is the device and
the room that decide whether that hour is really free. They now sit under the
same "زمانبندی" view, below the doctor's slots.
Each lane says how much of its shift is still free, and that number respects
capacity: a minute counts as busy only once the overlapping bookings reach
the resource's capacity, so a three-bed room with two appointments is still
open. Treating it otherwise would silently turn every multi-capacity resource
into a single-capacity one. ResourceFreeTimeCalculator does the sweep and
carries nine cases of its own.
only_bookable=1 keeps resources with no service offering out of the view;
they could only ever render an empty lane. On the seeded clinic that is five
resources down to two.
Two ruler defects the screenshot caught: hours rendered in Latin digits, and
the last label was half-clipped by the container so 21 read as 2.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Branches and rooms are not part of the resource-first product: a room is a
resource like any other, and the only thing the branch pages still managed —
opening hours — duplicated the resource's own shift.
What could not go is the address. Every appointment carries address_id (75 of
75 rows), the public booking site reads /clinic-pro/doctor-address/{id}, and a
resource derives its tenant pair from the address it belongs to. So
DoctorAddress stays as an invisible anchor with no page and no menu entry, and
GET /api/v1/addresses replaces GET /api/v1/branches for the forms that still
need to say "where".
BranchResolver was likewise not a branch feature. doctor_addresses is a global
table, so TenantFilter does not cover it and eight callers across booking,
availability, pricing and the catalog went through this resolver to avoid
leaking another clinic's address. It moved to Doctor\Service\AddressResolver
rather than dying with the domain.
The availability engine loses one layer: a resource's real hours were the
branch hours intersected with its shift, and are now the shift alone. That is
the single behavioural change, and the three tests that asserted the old
contract are replaced by one that states the new one.
Rooms already had a resource row each; the migration drops only the bridge
back to `rooms`, and drops it before the table — that foreign key is ON DELETE
CASCADE and the other order would take the resources, and their appointments,
with it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The appointments page only ever showed one doctor's row, but in the
resource-first model a single appointment can hold a room and a device at
the same time, and that — not the doctor's schedule — is what runs the
capacity out. An hour could look free on the doctor's lane while the only
alexandrite laser was already taken.
A third view, "منابع", draws one lane per resource for the selected day.
Blocks come from resource_occupancy rather than the appointment: that range
includes the device's setup and cleanup minutes and is the same range the
availability engine treats as busy. A multi-segment appointment therefore
shows up on every resource it holds, and each block links to the
appointment it belongs to.
GET /api/v1/resources/timeline keeps a fixed query count — one for
occupancy, one for shifts, one for the patient names — instead of one per
resource.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
In the resource-first model a resource is the unit of capacity, so its
working hours, holidays, services, skills and categories belong to it — not
scattered across a list page's modals plus a separate calendar page.
/admin/resources/{uuid} now carries six tabs and the active tab lives in the
query string, so back and refresh land on the same view. The old
/calendar URL redirects to ?tab=hours instead of 404ing.
The skills and services modal bodies became panels the tab renders directly;
the modals are now thin wrappers, so the list page keeps working unchanged
and there is still one implementation of each editor.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Categories are the taxonomy both services and resources select from, but
until now they could only be reached through the service catalog, so every
environment ended up with its own spelling of "whole body".
- Settings > Categories page: global CRUD plus the "includes" edge
- POST/GET/DELETE /api/v1/service-category/{uuid}/includes — a DAG, kept
separate from `parent` because "hand" sits under both "whole body" and
"upper limb"; a cycle is refused with 422
- PUT /api/v1/resource/{uuid}/categories — full replacement, and a category
from another environment is rejected explicitly since the uuid arrives in
the request body where TenantFilter does not reach
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A "سرویسها" action on each resource row opens a modal listing what that
resource performs, with its own duration and price. It follows the skills modal
exactly — same PUT-replaces-everything contract, same components, no new page
and no new route.
Leaving a cell empty means inherit, so the effective value is shown as the
placeholder along with where it came from: "40 — service default", "1,800,000
toman — branch". Without that the user cannot tell an unset field from a zero,
which is the one thing this screen has to communicate.
Two backend adjustments came out of wiring it up:
- the offering filter in findEligible is now scoped to the requirement's
resource type. Registering lasers for a service was making the room in the
same plan ineligible and breaking the whole booking — "who performs this" is
about the performing role, not about rooms and support resources. The seeder
caught this immediately.
- the scenario seeder now creates offerings and resource categories, so the
demo data exercises this model instead of leaving every resource empty.
Three vitest tests: inherited value with its source, saving an override, and
clearing back to inheritance. Verified in the browser at 1440 dark, 1440
compact and 390 mobile — the last with no horizontal scroll.
Panel suite 648 green across 98 files, tsc clean, encore build succeeds.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Removed package consumption flags and related properties from PriceQuote.
- Eliminated unused domain event publishing for policies and waitlist in Schedule.
- Cleaned up BookingEngineSeeder by removing package and policy related logic.
- Updated SeedScenariosCommand to reflect removal of policies from output.
- Dropped policy, package, treatment course, cancellation, waitlist, and domain event tables in migration.
- Removed domain event assertions from tests related to resource blocking.
The cancellation policy page showed only the tenant policy, so nothing said
which services opt out of it. Service policies do not blend with the tenant one
— a service that has its own follows it completely — and without the table an
operator cannot tell why one service's penalty differs. It lists them with a
link to each service.
The waitlist had the matches endpoint and no way to reach it. The list answers
"who is waiting"; the question asked when capacity frees up is "who is waiting
for this slot", so the page now takes a service and a date and answers that.
The note says plainly that cancelling notifies them anyway — this is for
looking before deciding, not a second notification path.
Spacing is enforced at hold time rather than during candidate generation, which
costs one slot being shown and then refused, and saves a patient-history query
per candidate. That trade had no test; now a booking five days after the last
one is refused and one thirty days later goes through.
Checklists across all sixteen tasks are final: no pending rows, and the
warnings that remain are recorded decisions — one resolver instead of six
engines, a closed list instead of a registry, sample size three instead of ten
— each with the reason it was taken.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Writing the query-count test that task 14 owed showed the growth was real: one
resource cost 10 queries, six cost 33 — about five per resource, because the
available-minutes figure walked each resource's calendar on its own.
Holidays, tenant overrides and branch hours are identical for every resource in
a report, so they now load once outside the loop; shifts and exceptions load for
all resources in one query each. The batched path is a new method rather than a
change to rawAvailability, which the booking engine also calls. The test pins
the shape of the growth, not an exact count.
Also landed:
- app:segment:seed-templates with beauty, dental and physio presets. Building
four segments and their requirements by hand is the first thing a new clinic
must do and the most tedious; this gives them something to edit instead of an
empty page. It refuses to touch a service that already has segments unless
--force, and it will not invent resource types the tenant never defined.
- book-all is all-or-nothing, proven rather than asserted: with a calendar open
one day a week and a 1-2 day protocol gap, session one finds a slot and
session two cannot, and every session must come back planned.
- credit_refundable: false takes the credit back with a negative adjustment and
deletes nothing — the ledger stays append-only.
- the segments editor has frontend tests, including that it sends back what the
user sees and renders read-only without the permission.
useBranches now returns [] for a non-array payload instead of throwing
"branches.map is not a function" and taking the page down with it.
BookingLocationsScanTest built a Clinic around a Doctor loaded from a different
manager, which Doctrine treats as a new entity; it flushed fine most runs and
failed on cascade in others. It now loads the doctor from the same manager.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The no-show records existed and drove the risk tag, but the patient's file
never showed the number behind it — the operator saw a tag with no evidence.
GET /patient/{uuid}/no-shows returns the count, the policy threshold and the
window, and the banner shows it only when the count is above zero: "0 no-shows"
on every healthy patient's file is an accusation nobody made.
The badge does not block anything and the docs say so. Blocking is an
eligibility policy from task 09 built on the same tag; a clinic that wants to
see the risk but still take a deposit must not have to switch the count off.
A test pins that a tagged patient still books.
Both report pages kept their range and branch in local state, so going back
from a resource lost the report and a shared link opened someone else's
default. They use useUrlState now, like every other list in the panel.
Three tests that were owed:
- the service-level cancellation policy beats the tenant one with no blending,
checked through the number that comes out rather than through the resolver
- a patient over the no-show threshold can still book
- occupied includes the waiting segment while active does not — if those two
came back equal the whole utilization report would be pointless
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The deactivation warning was blocked on task 07: there was no way to count "the
appointments on this resource" until occupancy rows linked the two. They do
now, so GET /resource/{uuid} returns upcoming_appointments. It stays off the
list endpoint, where it would be one count query per row.
It is a warning, not a block, and the wording says so: switching a resource off
does not cancel anything, it only removes the resource from future searches.
The panel shows it the moment the "active" box is unticked.
The calendar's exception range still used <input type="date">, which is
Gregorian. Operators say dates in Jalali, and the mental conversion is exactly
where an exception gets recorded a day off. PersianDateInput takes the same
YYYY-MM-DD string, so this is a drop-in swap.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every one of the fourteen named events now has an emit point. The four that
were missing all sat on paths owned by earlier tasks:
- AppointmentCompleted fires from both status-change routes, after the row is
saved. A rejected transition or a version conflict leaves no event; otherwise
the completed count runs ahead of the appointments themselves.
- AppointmentRescheduled is a third event, not a replacement. A rebook is a
confirm plus a cancel, and a consumer that only hears the cancel messages a
patient who still has an appointment.
- ResourceBlocked / ResourceReleased are a pair. Capacity coming back has to be
as audible as capacity going away, or the resource reads as permanently taken.
Publishing is now on the scheduler rather than an unregistered command: the
logic moved out of PublishDomainEventsCommand into OutboxPublisher so the
recurring message and the manual command share it, and the existing
worker-scheduler container consumes it. The scheduler message carries no data
on purpose — what to publish is read from the table, so an event recorded
between two ticks is not skipped. DomainEventMessage routes to async, since a
slow consumer was otherwise slowing the drain itself and its failure marked a
row failed that had in fact been delivered.
Panel work that these paths made reachable:
- Cancelling from the appointment page now goes through the policy-aware
endpoint and shows the penalty preview before the confirm, so the operator
does not discover the patient's penalty after the fact. The cancellation
service writes the timeline entry itself and accepts a reason, which that
path previously dropped on the floor.
- Rescheduling reuses the booking page under ?rebook=<uuid> — the search and
hold steps are identical and only the final step differs. The doctor picker
is hidden there: a reschedule is not an invitation to change doctors.
- A new GET /appointment/{uuid}/segments exposes the recorded plan. An empty
list is not an error, it means the appointment is slot-based, and that is
exactly what gates the resource-mode reschedule button.
AppointmentInvoiceCard no longer crashes the whole detail page when an older
invoice has no discount breakdown.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The engine from tasks 06 and 07 could find slots and hold them, but nothing in
the panel could actually book one.
- Search, hold, confirm stay three separate steps because they are three
separate states: between seeing a slot and taking it the seat is still open,
and between taking and confirming there is a deadline
- HoldCountdown reads the server's expires_at rather than starting its own
timer at render: browser clock skew and network latency both cost seconds,
and those seconds are exactly where a hold is lost. It turns urgent under a
minute and tells the parent the moment it lapses
- Per-role resource swap offers only the resources the engine returned for that
same slot. Listing every resource in the branch would let an operator pick
one that was never free and collect a 409
- An empty result is not an error: the reason code renders as a sentence
saying what to change
- Confirm requires a doctor and stays disabled until one is chosen — the
endpoint rejects it anyway, and finding that out after the hold clock has
been running is the wrong time
Reached from the appointments page as a separate action rather than folded into
the existing form: its search comes from the intersection of resource
calendars, not from one doctor's slots, and merging the two would confuse both.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Task 08's pricing chain was reachable only through the API, so a clinic could
not define a price list or see what a booked appointment was actually charged.
Price lists
- Draft / active / expired are shown as three states because they mean three
different things operationally: a draft has no effect on today's price at all
- Activation is a separate action rather than a checkbox in the form, matching
the backend rule that creating a list must not change anything
- "Copy" seeds a new list from an existing one starting the day the old one
ends, since most lists are last quarter's with a few numbers moved
- "All branches" is an explicit option, not an empty field
Invoice card
- Renders the recorded chain down to the final amount, hiding zero rows so the
card stays readable
- A missing invoice renders as a normal state, not an error: an appointment
that was never confirmed has no invoice
- Says outright that the numbers are from the appointment's own date and later
tariff changes do not move them — otherwise someone who edited a price
yesterday reads today's older number as a bug
Also corrects task 08's checklist: its test section carried a copy-pasted "no
UI was built" note against rows whose tests have existed since the task
shipped. Replaced with the real test names and the two that genuinely are not
covered.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Tasks 04 and 05 shipped working engines that a clinic could only reach through
the API. Both now have the panel that makes them usable.
Groups tab
- Inline min/max per group, saved on blur, with the meaning of an empty maximum
spelled out next to the field rather than left as folklore
- Incompatible / prerequisite rows; the prerequisite-cycle 422 surfaces the
server's own message, which is more precise than anything generic
- A live preview that calls the same service-selection/validate the public site
calls, debounced 400ms. Two separate calculations would eventually show the
operator and the patient different numbers
- The breakdown table shows which item was counted as the anchor and which as
additional, so a surprising total explains itself
Segments tab
- Sequence, duration source, patient-present and mergeable per segment, plus
resource requirements with an explanation attached to each occupancy mode
- A timeline bar whose widths are proportional to duration, with segments the
patient is absent for drawn faded. That contrast is the whole point of task
05: the waiting segment holds the room but frees the operator
- "No eligible resource" renders with a link to add one — an error with no
route forward is a dead end
Task 05's checklist had been left on "not started" this whole time even though
its code shipped with the task; it is now filled in against reality.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Tasks 07 through 13 each changed something the rest of the system might want
to know about, with no contract for saying so. And task 05 shipped a powerful
segment editor with no feedback on whether a clinic defined its segments right.
Events
- A closed list of names, because a consumer branches on the string and a
one-letter typo would produce an event nobody hears and no error either
- Payloads carry uuids and scalars only; non-scalars are dropped, not
serialised, so a consumer always fetches fresh rather than reading a stale
detached entity
- record() deliberately does not flush: the event row commits with the change
it describes, so a rolled-back transaction leaves no event behind. A test
pins exactly that
- app:events:publish drains the outbox; five failed attempts park a row with
its error rather than deleting it, because a silently dropped event is a
loss with no trace. app:events:prune only ever removes published rows
Reports
- Resource utilisation separates available, occupied and active minutes.
The gap between occupied and active is what exposes a bad segment
definition, and available is multiplied by capacity so a three-chair room
does not read as permanently over 100%
- A resource with no calendar reports utilization: null, not zero — dividing
by zero means something different from being idle
- Plan accuracy compares planned against actual duration per service and
flags both directions: running short wastes capacity that could have been
sold. Its row links straight to editing that service's segments, because a
report with no route to a fix does not get read
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Cancelling worked but had no policy behind it: no window, no penalty, nothing
happened to the deposit, and the no_show status had no effect at all.
Two rules that are expensive to get wrong, and both are load-bearing:
- The clinic cancelling its own appointment is never charged. That check is the
first line of the calculation, not somewhere in the middle, so a later
refactor cannot reorder it into charging patients for the clinic's decision.
- A penalty never exceeds what was actually paid. Anything above that is a
debt, and debt belongs to billing, not to cancellation. An unpaid appointment
is charged nothing and the response says why.
The default is no penalty at all — a penalising default would have made every
patient with a near appointment liable the moment this deployed.
No-shows are rows, not a counter on the patient: a counter loses which
appointment and when, which makes the 12-month window impossible. Crossing the
threshold adds an existing TenantTag; it never blocks the patient, because
blocking is an eligibility policy (task 09) written on top of that same tag.
Waitlist notifies up to ten matching people and the first to book wins. An
exclusive queue reads fairer but means a freed slot sits locked for half an
hour while someone ignores their phone — so the SMS says so explicitly instead.
Insufficient wallet balance does not fail the cancellation: the slot is freed
either way. A slot should not be held hostage to money.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Laser is six to eight sessions; the previous design only knew single
appointments, which is the exception rather than the rule.
- CourseProtocol per service: session count and three distinct spacings —
min is the earliest that is clinically allowed, ideal is best, max is where
the course starts losing its effect
- Starting a course creates every session up front as `planned` and copies the
protocol's numbers and per-session params, so changing the protocol tomorrow
leaves a running course alone
- Suggestions anchor on the last *completed* session, not the course start:
when session 2 slips, session 3 moves with it
- Slots are ranked by distance from ideal, not by earliest available — day 21
is worse than day 27 when 28 is the target
- book-all is all-or-nothing inside one transaction, with a moving anchor and a
90-day horizon; sessions past the horizon stay planned and are reported, not
treated as failures
- The effective minimum is the stricter of the protocol and the task-09 spacing
policy, so a clinic rule never fights the protocol
- Cancelling one session returns only that session to planned; abandoning a
course does not cancel its appointments, which stays an explicit decision
One active course per (patient, service) via active_course_key, the same
partial-uniqueness trick as Appointment::activeSlotKey.
Admin: CourseProtocolsPage, TreatmentCoursePage and a courses tab on the
patient record.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
"Six laser sessions" is the common case in an aesthetics clinic: the patient
pays once and books the sessions later.
Credit is a ledger, not a counter. No table has a remaining/used_count column
and a schema test enforces that — the balance is always SUM(delta) over
append-only rows, so every number a patient sees has a full history behind it.
Corrections are new rows, never edits.
- purchase / consume / refund / adjustment / expiry, each with a reason, an
author and the appointment it belongs to
- consume happens in confirm(), never in quote(): if the preview consumed, a
page refresh would cost the patient a session
- cancelling adds a refund row; the consume row stays
- FIFO across a patient's packages — the oldest is closest to expiring
- an empty package is not an error, it just does not apply and the patient pays
- adjust/expire need a doctor or clinic role, and adjust always needs a reason
- app:package:expire writes the closing row so "where did my 3 sessions go?"
always has an answer
Consume takes a pessimistic lock on the one package row. That is the opposite
of task 07's slot buckets, and docs/api/package.md carries the table explaining
why, so nobody unifies them later.
Idempotency checks for an existing consume row before inserting rather than
catching the unique violation: in Doctrine that exception closes the
EntityManager and burns the rest of the request. The unique key stays as the
last line of defence.
Admin: PackagesPage, a packages tab on the patient record, and a ledger page
whose running-balance column shows where the final number came from.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Task 09 shipped a powerful API that a non-technical clinic owner could not
safely use. This closes that gap: activation now requires having seen what the
rule actually does.
- PolicySimulator runs a policy against real past appointments and writes
nothing: evaluation works on facts (never entities), the whole run sits in a
transaction rolled back and cleared in `finally`, and a test counts rows in
five sensitive tables before and after
- activate() now demands a simulation of the *same version* — a report for
version 1 does not unlock version 2
- PolicyTemplateRegistry: six ready-made rules, so the common case never
touches a raw condition
- Severity from the affected ratio; 0% is a warning too, since a rule that
changes nothing usually has a condition that never matches
- An empty clinic still succeeds with a warning, otherwise a new clinic could
never activate anything
Admin: PoliciesPage, PolicyFormPage, PolicySimulationPage, and a
PolicyConditionBuilder built entirely from GET /policy-schema — a test proves a
field that exists only in the schema shows up with no frontend change, and that
operators are filtered per field type.
The schema response now carries per-field metadata (label, type, meaningful
operators) so the form has one source of truth instead of two.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Completes task 03. The resource calendar page edits weekly shifts, records leave and
maintenance, and previews two weeks of availability with a Persian reason for every
empty day — showing the raw server key ("outside_branch_hours") to a user would have
been a meaningless message. The preview is labelled raw on the page itself, because
booked appointments are not subtracted yet and mistaking it for bookable time leads
to overbooking.
The interval algebra moved to src/Shared/Time/TimeInterval.php with twelve unit
tests: tasks 05 and 06 need the same union/intersect/subtract, and a second
implementation is how two subtly different definitions of "overlap" get born. The
half-open [start, end) contract is what makes a shift ending at 13:00 and one
starting at 13:00 not overlap.
AvailabilityQueryCountTest locks the query count flat: one day and ninety days cost
exactly the same number of queries. Without it the first refactor can put a query
inside the day loop and a 90-day response quietly becomes hundreds of queries —
something only production would reveal.
app:resource:calendar:backfill derives shifts from existing WeeklySchedule sessions,
so the resources created in task 02 are not left with empty calendars. It skips any
resource a user has already configured, which is also what makes it idempotent. The
weekly schedule itself is untouched: this is a copy, not a migration.
Also added --replace to the holiday import. upsert keys on the date, so a row written
with a *wrong* date can never correct itself — re-running just creates the right row
beside the wrong one. That is exactly what happened after fixing the Jalali
conversion bug, and it was caught while capturing real responses for the docs.
Deferred with reasons recorded in the checklist: seasonal shift validity (two
nullable columns can be added later without backfill, so "needed from day one" does
not hold), and a Jalali date picker in the exception form.
1154 tests / 3229 assertions. phpstan at its 14-error baseline, none in touched
files. tsc clean, vitest 622 tests.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Four pages on the existing design system: a resources list whose branch/type/skill/
status filters live in the URL and go straight to the server, and three supporting
pages for types, skills and pools. Filtering client-side over a list the server had
already filtered would have been a second source of truth, so the page does neither.
The pool members dialog only offers resources from the pool's own branch and type —
the same rule the server enforces with 422, applied early so the user never reaches
the error. Skill assignment and pool membership are both full replacements, and both
say so in the dialog, because a partial-looking save that silently drops rows is
worse than an explicit one.
Wiring that was missing: deactivating a staff member through
PATCH /api/v1/staff/{uuid}/toggle now closes their resource too. Without it an
inactive operator would still have shown up in availability search. It is an explicit
call rather than a Doctrine lifecycle callback, since callbacks do not fire for
getArrayResult() — which is how every admin list is built — and that asymmetry is
its own bug. The reverse does not hold: closing a resource does not deactivate the
person, who may be purely administrative.
docs/api/resource.md documents all sixteen endpoints with responses captured from
real curl runs against ddev, including the 422 bodies for person-capacity and
non-scalar attributes. staff.md gains a "relationship to resources" section stating
that job_title is not a skill. tenancy.md contrasts these aggregate children —
whose roots do carry a tenant pair — with the branch_working_hours case from task 01,
where the root was global and the classification was wrong.
Also fixed a pre-existing flaky test: NumericFieldNormalizerTest guarded its random
mobile against collision on the never-reset db_test but not its random national code,
so a full-suite run could fail with 422 and close the EntityManager, taking an
unrelated test down with it. Both are now guarded, and the assertion prints the
server's response instead of a bare "422 is not 201".
Verified: phpunit 1119 tests / 3113 assertions green; slot-mode frozen contract green;
phpstan 14 errors before and after, none in touched files; tsc clean; vitest 88 files
/ 617 tests green.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Three pages, all on the existing design system: BranchesPage lists the current
environment's booking locations with their working-hours and active-room counts,
and two subpages edit the week and the rooms. The list page deliberately does not
create or rename a branch — clinic and doctor detail pages already do that, and
duplicating it would give one physical place two edit surfaces. Route permission
reuses `appointment_settings` rather than inventing a new one.
Two real bugs fell out of exercising this end to end:
`days` was serialising as a JSON *array*, not an object keyed "0".."6" — keys 0..6
are sequential so json_encode collapses them to a list. The client reads days["0"]
either way, so nothing looked broken, but the response shape was unstable: one
missing day would flip the same field to an object. The controller now casts to
stdClass and WorkingHoursTest::testDaysIsAJsonObjectNotAnArray pins it. Found by
curling the endpoint for the docs, not by any test.
`<input type="time">` caps at 23:59, so it can neither display nor produce the
legal end value 1440. An all-day range would have vanished from the form and been
corrupted by the first save. Ranges now carry an explicit end-of-day flag, with a
round-trip test proving 1440 survives.
docs/api/branch.md documents all eight endpoints with responses captured from real
curl runs against ddev, including the 422 and 404 bodies. doctor.md records that
active/timezone now appear on all nine existing address endpoints (additive), and
tenancy.md gains the two lessons this task taught: an aggregate child whose root is
itself declared global inherits no environment and needs a real pair, and
TenantFilter is not a substitute for an explicit ownership check because hard
isolation only applies to a *chosen* context.
Verified: phpunit 1067 tests / 2974 assertions green; slot-mode frozen contract
green; phpstan 14 errors before and after, none in touched files; tsc clean;
vitest 87 files / 612 tests green.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- Refactor multiple admin pages (BlogsPage, ClinicsPage, DoctorsPage, etc.) to utilize the new useUrlState hook for managing pagination, search, and filter states via URL.
- Ensure that the state persists in the URL, allowing users to return to the same state when navigating back from detail pages.
- Update relevant components to handle state changes appropriately and maintain clean URLs by removing default values.
- Add SlotPicker component for selecting appointment slots based on availability.
- Create tests for useUrlState to validate its functionality and ensure correct behavior when interacting with the URL.
- Update API documentation to reflect changes in appointment creation and slot selection processes.
- Added BackButton component to standardize back navigation across pages.
- Integrated BackButton into various pages, replacing custom back buttons for consistency.
- Updated PageHeader to accept backTo prop for displaying BackButton when navigating from subpages.
- Created useGoBack hook to handle navigation logic, determining whether to go back in history or redirect to a fallback page.
- Added tests for BackButton and its integration with PageHeader to ensure expected behavior.
- Updated CoverageRule and related entities to include franchise_percent instead of franchise_rials.
- Modified Appointment entity to carry supplementary insurance ID alongside base insurance.
- Implemented SessionBillingService to ensure finalized invoices for insured patient sessions.
- Created InvoiceFinalized event to trigger claims creation upon invoice finalization.
- Added BackfillMissingClaimsCommand to generate claims for finalized invoices without existing claims.
- Developed tests to validate the new functionality for supplementary insurance handling in appointments and claims.
Phase 6 of the tenant series. GlobalTables::DEFERRED is now empty and the
coverage test asserts it stays that way.
payments carries the (entity_type, entity_id) pair and belongs to the
receiving side, never the payer: an appointment payment takes the
appointment's environment, a subscription takes the environment its buyer
owns, and an SMS wallet top-up takes the wallet's. The patient never chose
an environment, so TenantFilter stays off for them and they still see their
own payment.
Three corrections to the analysis the phase was planned on, each backed by
the code or the data rather than the plan:
- A third payment type exists. Payment::TYPE_SMS_WALLET is created in
SmsWalletController and already carries its environment in the metadata;
without assigning it the write would fail at flush.
- clinic_subscriptions has no user_id, and its trial rows carry no payment,
so it cannot drive the subscription backfill. The environment is derived
the way handleSubscriptionActivation derives it — and that method now
reads the pair off the payment instead of re-deriving it, so a payment and
the subscription it buys can no longer land on different environments.
- WalletTransaction is not a child of Payment. payment_id is nullable and
none of the four creation sites set it; the wallet is a person's, with a
running balance per user. It and Settlement, which withdraws from that same
wallet, are global with a recorded reason instead.
bank_accounts and pos_devices move from the registering user to the
environment. Their pair is deliberately nullable: nothing in the existing
data says which of a multi-environment owner's cards belongs where, and
guessing would point real money at the wrong account. Ambiguous rows stay
unassigned and the migration reports how many. The cost is that such a row
is invisible in every environment, so the owner reaches it through a
user-scoped lookup that runs outside the filter, and assigns it with
PATCH .../{uuid}/environment. The admin panel marks those rows and offers
the assignment.
Tests: 896 backend (+11), 570 frontend (+4). PHPStan unchanged at its 17
pre-existing errors.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- Introduced `online_share_enabled` and `online_share_percent` fields in the `doctor_secretaries` table to manage secretary shares from online appointments.
- Added `bank_account` field in the `profiles` table to store user-level IBANs for settlements.
- Created `secretary_earnings` table to track earnings per secretary from online appointments, including a foreign key relationship with `financial_breakdowns`.
- Implemented `SecretaryEarning` entity and repository for managing secretary earnings.
- Developed `SecretaryShareResolver` service to determine which secretaries earn from online payments.
- Added `UserIbanResolver` service to handle user IBAN retrieval and management.
- Created `HasIbansTrait` for entities to manage IBANs in a JSON format.
- Implemented tests for secretary earnings and API endpoints for managing secretary shares and IBANs.
An appointment can now carry the insurance it is billed with: the service kind
(outpatient/inpatient) and the basic insurance. Confirming it no longer hands the
whole amount to the patient — the visit is split through BillingCalculator with the
coverage percent of that service kind, and the choice travels to the encounter and
the invoice built from it.
The enabled service kinds are a tenant-wide setting (all of that tenant's
insurances share it), so a tenant covering only one kind is never asked which one:
the panel resolves it the same way the server does.
- add tenant_service_category_settings + TenantServiceCategoryService, exposed on
the existing insurance-pricing endpoint (service_categories,
default_service_category); at least one kind must stay enabled
- add appointments.insurance_service_category / insurance_base_id with
AppointmentInsuranceService validating them against the tenant's own settings
and active contracts (basic only), accepted by PATCH and by confirm
- snapshot the kind on patient_sessions and invoices; the visit's coverage rule is
resolved per kind (services keep using their own ServiceItem.service_category)
- lib/insuranceShares becomes the single client-side mirror of BillingCalculator,
shared by the confirm modal, the appointment edit page and the session form
- surface the selection: confirm modal (with live shares), turns timeline chip,
appointment edit page, patient record service card and invoice summary
- the session form shows the insurance block whenever the tenant has an active
contract and prefills the patient's own insurance, so it can be changed
- fix: the confirm modal showed a zero visit price when the appointment had none —
it now falls back to the tenant's free-visit price like the server
- fix: useServiceCategories read one level too shallow, so Persian labels never
arrived and raw enum keys leaked into the contract summary
- fix: BlogsPage test asserted the public blogs endpoint after the page moved to
the admin one
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Base insurance is a percentage-only rule: patient share is now total minus the
base share, and the contract franchise no longer inflates it (franchise stays
meaningful for supplementary contracts only).
Coverage percentages are managed centrally by admin per service category
(outpatient/inpatient, extensible via the ServiceCategory enum). A tenant
contract may override a category, otherwise it follows the admin default live —
changing the central value immediately applies to every contract that did not
override it.
- add ServiceCategory enum + GET /api/v1/service-categories as the single source
of the category list for every client
- add insurance_coverage_defaults (+ GET/PUT admin coverage-defaults endpoints)
and expose coverage_defaults on the insurance list and insurance-pricing
- add tenant_insurance_category_coverage; tenant-insurances accepts optional
category_coverages (needs insurances.update) and returns the effective
percentages with their source
- add service_items.service_category; visits always resolve as outpatient
- drop the reverse-engineered percent from patient_share_rials in MyPatientsPage
and align the client-side BillingCalculator mirror in CreateStep
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- Added support for 'partial' payment status in MyPaymentsPage and related components.
- Updated API responses to include 'paid_rials' and 'summary' for invoices.
- Introduced InvoicePaymentStatus service to derive payment status based on actual payments.
- Enhanced tests to cover new payment scenarios including partial payments and payment methods.
- Updated documentation to reflect changes in payment status and API responses.
- Implemented a new API endpoint `/api/v1/my/billing/payments/summary` to provide a financial summary of payments with filters for national code, status, and date range.
- Updated the InvoiceRepository to aggregate totals for paid and unsettled invoices.
- Created a new hook `usePaymentsSummary` to fetch summary data in the frontend.
- Redesigned the MyPaymentsPage to align with the ClaimsPage structure, incorporating a design system, summary statistics, and improved filtering options.
- Added tests for the new payments summary endpoint to ensure correct functionality and filtering behavior.
The public doctor payload built `active`/`free_turn`/`hours_of_work` from the
personal schedule alone, so a doctor bookable only at a clinic was reported as
"نوبتدهی غیرفعال". Aggregate over every schedule instead: any schedule with
online booking on and an active day makes the doctor bookable, and the disabled
label only appears when all of them are off.
Three admin-panel fixes for the same class of bug:
- AppointmentsPage took the selected doctor from `dbUuid`, which is the clinic's
uuid inside a clinic context — the slots request 404'd. Use `doctorUuid`.
- TurnsTimeline rendered any error or unknown empty_reason as "این روز شیفت کاری
ندارد". Errors now surface as errors and unknown reasons get a neutral message;
the day-off wording is reserved for an explicit day_off from the backend.
- Admins have no clinic context, so slots fell back to the personal schedule.
They now pick a location from `appointment-booking-locations` and that choice
drives the slot, service and create-appointment requests.
Adds `app:schedule:normalize-format` for legacy rows stored as a bare JSON list
covering only Saturday, which read as day-off for the rest of the week.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Two faults, one root: the per-context booking work updated ScheduleSection but
left the rest of the panel calling slot endpoints without clinic_uuid. Absent
clinic_uuid means the personal practice, so the panel asked about a schedule the
doctor barely uses and got nothing back.
- useClinicContext() resolves the current environment once and is used by the
appointments page, useDoctorBookingServices, ServiceSlotPicker and both
queries in NewAppointmentDrawer (a fifth call site a sweep turned up). It
returns null in a doctor's personal environment so the mirror-image bug — a
doctor seeing the clinic's schedule at their own practice — cannot appear.
clinicUuid is part of every query key; without it the cache leaks across
environments.
- appointment-slots returns empty_reason (no_schedule | holiday | day_off |
outside_window). TurnsTimeline rendered «این روز تعطیل است» for any empty day,
which is what the bug report actually saw; it now says which of the four it is.
- booking-locations lists a location only when the context has an address and an
active shift points at it. The dev data had three "personal" schedules whose
shifts referenced the clinic's address, so the public site advertised a
personal practice that could never be booked.
- ?date= adds available_on_date per location, validated as a real calendar date.
- MyAppointmentsController and AdminApiController resolved the appointment
address with no context and could store the wrong one. Both now go through the
new BookingContextResolver, which also replaces AppointmentController's private
copy of the same membership check.
- app:schedule:audit-locations reports shifts pointing at a missing or foreign
address; --fix deactivates them rather than deleting.
Verified against the reported doctor: same date, no clinic_uuid -> 0 sessions,
with it -> 1 session; a full week matches the configured Sat/Tue/Wed/Thu.
Suite: 417 tests, 2 failures — both pre-existing and unrelated.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Implement DoctorPermissionsModal for managing doctor permissions in clinics.
- Create usePermissions hook to handle user permissions context.
- Add migration for clinic_doctor_permissions table with default permissions.
- Develop ClinicDoctorPermissionController for handling permissions API.
- Create ClinicDoctorPermission entity to manage permissions data.
- Implement ClinicDoctorPermissionRepository for database interactions.
- Add ClinicDoctorPermissionChecker for permission validation logic.
- Write tests for clinic doctor permissions functionality.
