Task 09 shipped a powerful API that a non-technical clinic owner could not
safely use. This closes that gap: activation now requires having seen what the
rule actually does.
- PolicySimulator runs a policy against real past appointments and writes
nothing: evaluation works on facts (never entities), the whole run sits in a
transaction rolled back and cleared in `finally`, and a test counts rows in
five sensitive tables before and after
- activate() now demands a simulation of the *same version* — a report for
version 1 does not unlock version 2
- PolicyTemplateRegistry: six ready-made rules, so the common case never
touches a raw condition
- Severity from the affected ratio; 0% is a warning too, since a rule that
changes nothing usually has a condition that never matches
- An empty clinic still succeeds with a warning, otherwise a new clinic could
never activate anything
Admin: PoliciesPage, PolicyFormPage, PolicySimulationPage, and a
PolicyConditionBuilder built entirely from GET /policy-schema — a test proves a
field that exists only in the schema shows up with no frontend change, and that
operators are filtered per field type.
The schema response now carries per-field metadata (label, type, meaningful
operators) so the form has one source of truth instead of two.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Rules become data instead of code: a clinic can say "laser under 18 requires
parental consent" without a deploy.
Engine
- Policy / PolicyVersionLog entities, closed field/operator/effect lists per
category (PolicySchema), condition validation at write time
- PolicyResolver: priority -> specificity -> age, combining effects by
veto / max / sum / union
- A missing fact fails its clause instead of silently passing it
- Policies are drafts until activated, and are versioned rather than edited
Wiring
- selection -> ServiceSelectionValidator
- eligibility + spacing -> BookingPolicyGuard, at hold time not confirm time
- resource + timing -> AppointmentPlanBuilder, including template-less services
- pricing -> PricingEngine, alongside (not replacing) the manual discount
The condition column is named condition_json: `condition` is a MariaDB keyword
and broke every INSERT.
Tests: 17 in tests/Policy including NoPolicyRegressionTest, which pins that a
clinic with no policies sees byte-identical output to task 08.
Docs: docs/api/policy.md (real captured JSON) + docs/architecture/policy-engine.md.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Section 12 and the fifth closing rule: changing a price never changes an
already-booked appointment.
The pricing chain already existed and worked. Two things were missing. Tariff only
carries a year, so a rate change starting in Mehr could not be expressed — PriceList
now takes an explicit date range and Tariff remains the layer beneath it. And an
appointment stored a single number, so after a price change or a discount nobody
could say what those 2,400,000 rials were made of.
Price resolution walks four layers per service and takes the first hit: branch
override, then the covering price list, then the yearly tariff, then the service's own
price. The last one is the guarantee that a date no list covers still returns a price
rather than zero or an exception. breakdown.sources reports which layer answered, so a
surprising number can be traced instead of guessed at.
Two calculation decisions worth stating. Tax is computed on the patient's share, not
the gross — a patient does not pay tax on the portion the insurer covers. And a
discount larger than the amount floors the total at zero rather than going negative,
because a negative balance would mean the clinic owes the patient money, which nothing
downstream is built to mean.
A branch-specific list deliberately does not count as overlapping a general one; it
takes precedence instead. Treating them as a conflict would have made per-branch
exceptions impossible to express. Lists have no effect until activated, so drafting
next quarter's prices cannot disturb today's.
PriceSnapshot has no setters and a unique key on appointment_id: a snapshot that can
be edited is not a snapshot, and two invoices for one appointment would be two truths.
Corrections are a new row plus voiding the old one. Invoices are written during
confirm with the prices of that moment — computing later would let a rate change
between booking and invoicing produce a different number, which is exactly what rule
five forbids.
12 tests. The one that matters is
testBookedAppointmentKeepsItsOriginalInvoiceAfterAPriceChange: book, double the
service price, watch quote return the new number while the appointment's invoice
returns the old one. Without it rule five is only a claim.
1220 tests / 3551 assertions. phpstan back at its 14-error baseline. Frozen slot
contract green.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Section 11 and the third closing rule of the design document: preventing a double
booking is the database's job, not the code's. Any "is it free?" check in PHP has a
race window between the read and the write — two concurrent requests both see free
and both write.
MariaDB has no range EXCLUDE constraint, so every occupied interval is broken into
fixed five-minute buckets under UNIQUE(resource_id, bucket_at, seat). The code only
INSERTs; a rejection from the database *is* the answer. `seat` carries capacity: a
three-bed room has seats 0..2, allocation walks upward on each collision, and the
fourth concurrent hold finds nowhere to sit. Counting capacity in PHP would have
rebuilt the very race this removes.
Buckets are written through DBAL rather than the ORM on purpose: a unique violation
raised inside flush() closes the EntityManager, and the next seat attempt would then
fail with "EntityManager is closed", hiding the real outcome.
Occupancy is one row per (segment × resource). The reference test asserts the payoff
directly: for a 55-minute appointment of numbing / waiting / laser, the room gets
three rows and the operator only two — the operator holds nothing during the wait and
stays bookable for someone else.
A partial hold never survives. If the second resource has no room, the first is
released and the hold itself removed; otherwise a resource stays locked for an
appointment that will never exist.
Confirming does not re-reserve anything — the seats were taken at hold time and only
the label changes. Re-reserving on confirm would reopen the race the hold closed.
Cancelling marks rows `released` instead of deleting them, because the history of
which resource was busy when is the input to the utilisation reports; the uniqueness
buckets *are* deleted, or that interval would stay locked forever.
Expired holds are released by the existing scheduler rather than a new one. That
exposed a bug in my own change: the flush guard used $count, which now includes
released holds, so reset([]) could pass false to save(). It is guarded on $expired.
The appointment itself is still built with the existing constructor, so
active_slot_key, events and the payment path behave exactly as before — the
multi-resource occupancy sits beside them, not instead of them.
12 tests. Two matter most: the second hold on the same resource and interval getting
409, and a test that writes a duplicate bucket row over a *separate connection* and
expects the unique-key violation — if that one ever passes silently, the guarantee
had moved back into the code.
1208 tests / 3495 assertions. phpstan at its 14-error baseline. Frozen slot contract
green.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Section 10 of the design document, and the payoff for tasks 01–05. The engine slides
a multi-segment plan across resource calendars and answers which times are actually
possible, with a suggested resource for each role. Until now the only conflict the
system checked was the doctor's; rooms, devices and operators did not exist.
Allocation is per *role*, not per segment, and that is what returns the wasted
capacity. An operator with no requirement during "waiting for the cream" is simply
not examined for those minutes, so another patient can use them. The reference test
encodes exactly that: patient A holds 10:00–11:00 while the operator is only busy
10:00–10:05 and 10:35–11:00, and patient B is offered a slot inside the gap with the
second room assigned. The spec says the task is not verified without that scenario.
One resource is chosen for every segment that needs its role, not independently per
segment — otherwise the operator in segment 1 and segment 3 could be two different
people and the patient would change hands mid-treatment.
Occupancy is stored one row per (segment × resource) rather than one per appointment.
The granularity is the whole point; a row per appointment would re-create the
single-interval model the design rejects. Reserved intervals are widened by each
resource's setup/cleanup, because the resource genuinely is not available then.
booking_mode gains a third value, resource, alongside slot and service. It is purely
additive: the default stays slot, no environment moves on its own, and a location
that has not opted in keeps the untouched legacy path. The frozen slot-mode contract
stays green.
Performance is a test, not a hope: 30 days, 20 resources and 500 existing bookings
complete well inside the 500ms budget. Every input is read once and the rest is in
memory — no query inside the day or candidate loop — and candidates are generated
only from the free windows of the scarcest role, which turns tens of thousands of
candidates into a few hundred.
An empty result is not an error and not a 404: it carries
reason: "no_capacity_in_range" so the caller does not have to infer meaning from
emptiness.
Also fixed a genuinely intermittent test defect: NumericFieldNormalizerTest padded a
random number with the three-byte Persian "۰" using byte-based str_pad, producing
broken UTF-8 whenever the number was short. It failed roughly at random. The improved
assertion message added earlier is what identified it immediately.
1196 tests / 3414 assertions. phpstan at its 14-error baseline.
Resource-picking strategies, the availability cache and the settings UI are recorded
as outstanding in the checklist with reasons — the cache in particular would be
premature while the performance test passes comfortably without it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Section 7 of the design document, and the reason the whole resource layer exists.
A laser session is not one block: numbing cream (5 min, room + operator), waiting for
it to work (30 min, room only), the laser itself (20 min, room + operator + device),
aftercare (5 min, room + operator). Under the single-interval model the operator is
locked for all 60 minutes while actually working 30 — half the capacity thrown away.
AppointmentPlanBuilder turns (service, selected items, branch, patient) into a plan:
segments with offsets, durations and resource requirements. It deliberately assigns
no absolute time and no specific resource — that is the next task. This only produces
the *shape* of the appointment.
Segment duration comes from one of two sources. A fixed segment carries its own
number; an item-driven one gets its duration from task 04's DurationCalculator, so
"the laser itself" grows with two treated areas while "waiting for the cream" does
not. One number could not have expressed that.
Three contracts worth stating:
- A service with no segment templates falls back to a single continuous segment
requiring the doctor resource — exactly today's behaviour. Without it every
existing service would have become unplannable overnight.
- A segment with no requirements is valid: "waiting at home" consumes time but
occupies nothing.
- same_gender_as_patient with an unknown patient gender is a 422, not a silently
dropped requirement. Dropping it quietly would route the patient to a resource the
clinic said must not serve them.
When no resource qualifies, the error names the role, the skill and the branch —
"no female operator with the skill «Alexandrite laser» is available at «Central»" —
rather than an empty result the caller has to interpret (section 10).
occupancy_offset carries each requirement's setup/cleanup minutes for the availability
engine. It is taken as the maximum across candidates, because the builder does not yet
know which resource will be picked and under-reserving means the next appointment
lands on top of the cleanup.
11 tests covering the document's reference example (offsets 0/5/35/55, total 60),
item-driven scaling, the no-template fallback, all three gender-constraint outcomes,
merging and both caps. 1186 tests overall. phpstan back at its 14-error baseline;
slot-mode frozen contract green.
The admin segments page is not built; the checklist records it with a target. The
backend and preview endpoint are complete and consumable without it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Section 5 of the design document rejects summing service durations. "Face + bikini"
is not 15+12=27 minutes but 15+8=23 — preparation and settling the patient do not
happen twice. Seven wasted minutes times twenty appointments a day is an hour of
capacity lost daily, and AppointmentController was doing exactly that plain sum.
Each item now carries a solo duration and an additional duration. One item counts at
its solo duration and the rest at their additional; the anchor is the item with the
*largest* solo duration rather than the first one selected. Anchoring on selection
order would have let the same basket cost different amounts depending on click order,
so a patient could buy a shorter appointment by reordering. Largest-first is also
conservative: no combination is ever under-estimated, and under-estimating pushes the
next appointment on top of this one.
additional_duration_minutes stays NULL by default and the entity reads NULL as "same
as solo", so every existing service keeps behaving exactly as before — the 236
appointment-domain tests pass unchanged. The old duration_minutes column is kept and
written in step rather than renamed, because other consumers still read it.
ServiceBookingCalculator now delegates to DurationCalculator, which is the one-line
change task 00 predicted when it deliberately preserved the naive sum.
Selection rules are data, not policy: min/max per group is a number, and "bikini does
not combine with full body" is a relation. Putting either in a rules engine means
several rules per service and nobody able to explain a rejection. Validation returns
*all* errors at once rather than the first, since a user with three problems should
not make three round trips. Prerequisite cycles are rejected at write time — storing
both "A requires B" and "B requires A" would make every selection permanently invalid.
Named CatalogCategory, not ServiceCategory: that name is already an insurance enum
(outpatient/inpatient) living on ServiceItem itself, so the two would have collided in
the same file's imports.
Also fixed a defect the tests caught: breakdown() used $overrides[$id]?->… on a key
that may not exist, which warns instead of yielding null.
1175 tests / 3289 assertions. phpstan measured at 14 errors both with and without
this change (verified by stashing). Slot-mode frozen contract green.
The admin UI tab for groups and relations is not built; the checklist records it as
outstanding with a target. The backend is complete and
POST /service-selection/validate is consumable without it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Section 9 of the design document builds free time by subtracting seven layers.
Four existed and all of them hung off the doctor. This adds the missing ones and
puts them on the resource:
branch hours ∩ resource shifts − national holidays − resource exceptions
Booked appointments and holds are deliberately NOT subtracted here — those are
tasks 06/07, as is intersecting several resources. The method is called
rawAvailability() so nobody mistakes the output for bookable time. Nothing in this
change calls SlotCalculatorService; the existing slot path stays frozen.
Four types of exception (leave, absence, maintenance, ad-hoc closure) share one
table because all four are "an interval subtracted from a resource's calendar";
splitting them would mean four queries per availability lookup instead of one.
Holiday overrides work in both directions: a clinic that opens on a public holiday,
and a clinic that closes on an ordinary day.
Every empty day carries a reason (national_holiday, no_shift, branch_closed,
outside_branch_hours, exception, …). Without it an empty response is
indistinguishable from a bug and the first person debugging has to read four tables
by hand.
Three real defects found on the way:
JalaliDateService.gregorianToJalali() was wrong — it returned [3006, 7, 3] for
2026-07-30 instead of [1405, 5, 8], roughly 1601 years off. jalaliYear(),
jalaliMonth(), jalaliMonthRange() and jalaliYearRange() all inherit that, so the
representation reports built on them have been filtering by nonsense ranges. The
class's own formatDateTime() was already correct because it used IntlDateFormatter,
so both conversions now go through the same mechanism, and JalaliDateServiceTest
pins Nowruz and the 6/31→7/1 boundary. There were no tests before, which is why
nobody noticed.
TimeInterval added a seconds-based midnight to a minutes-based interval, turning an
eight-hour shift into eight seconds. The conversion is now an explicitly named
minutesToAbsolute() so the unit change cannot happen silently again.
HolidayService.upsertNational() persisted but left flushing to the caller. Every
HTTP request reboots the kernel, so the caller often held a different
EntityManager: persist landed on one, flush on the other, and nothing was written
with no error at all. The write is now self-contained.
119 tests across tests/Resource, tests/Branch and tests/Representation. phpstan
clean on both touched domains.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The document's first golden rule is "the calendar belongs to the resource, not to
the doctor". Today the only thing that can be occupied is a doctor, and ClinicStaff
is a label on services and appointments with no calendar, capacity or skills. This
adds the layer underneath: anything that can be busy — doctor, operator, assistant,
device, room, bed, chair.
Two corrections to the planned schema:
- `address_id` → doctor_addresses, not `branch_id` → a new branches table. The
branch already exists and is the address (task 01).
- UNIQUE is (doctor_id, address_id), not (doctor_id). A WeeklySchedule is per
(doctor, clinic) but every session inside it carries its own location_id, so one
doctor already works at several addresses within one environment. Keying on the
doctor alone would have made that unrepresentable — and task 03 gives each
resource its own calendar, which is exactly per-location.
Design points worth keeping:
- Resources bridge to Doctor/ClinicStaff/Room rather than absorbing them; those
three have live consumers (appointments.doctor_id, service_item_staff, the public
site) and subclassing would mean migrating all of them at once. At most one bridge
column is non-null, enforced in the entity because MariaDB will not reliably
enforce a multi-column CHECK.
- Capacity is concurrency: a three-bed injection room is one resource with capacity
3, not three resources, so occupancy in task 06 stays a COUNT against a limit
instead of a merge of three calendars. A person resource is refused capacity > 1.
- Skills are a table, not rules. With 50 operators and 200 services, expressing
"who may operate what" as policy would mean 10,000 rules.
- findEligible() uses HAVING COUNT(DISTINCT …) because "skills A and B" means both;
a plain IN would have matched a resource holding only one.
- setup/cleanup minutes occupy the resource without being part of the patient's
appointment, and are per-resource — distinct from the existing per-doctor
WeeklySchedule.meta.buffer_minutes, which stays untouched.
Two real bugs found by running the backfill against real data rather than fixtures:
ResourceLinker::systemType() persisted a type without flushing, so the next lookup
missed it and created a second — the run died on "Duplicate entry 'doctor-1-staff'
for key uniq_rt_tenant_code". It now keeps an identity map for the unit of work.
The command looped over every WeeklySchedule once per environment, which is
quadratic and never finished on real data. Doctors are now a single pass keyed by
the schedule's own environment. It also flushes per environment and accepts
--pair=clinic:12, so one bad row cannot close the EntityManager and abort a
fleet-wide run, and operators can re-run for a single clinic.
Staff are the one case that cannot be derived: nothing records which branch they
work at. Rather than guessing the first one and seating them in the wrong building,
multi-branch environments are skipped and reported.
88 tests, 230 assertions across tests/Resource and tests/Branch. phpstan clean on
src/Resource.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Task 01 planned a new `branches` table with `doctor_addresses.branch_id` bridging
to it. That plan was wrong: the branch already exists and is called
`DoctorAddress`. It carries name, address, telephone, coordinates, city/province
FKs and an owner (`forDoctor` / `forClinic` + `type`), and the whole system
already consumes it with exactly that meaning — `WeeklySchedule.sessions[].location_id`
points at `doctor_addresses.id`, `appointment-booking-locations` calls each row a
booking location, and nine CRUD endpoints plus four admin pages manage them.
A parallel table would mean two sources of truth for one physical place and a
branch that `location_id` never references.
So no `branches` table and no duplicate branch CRUD. Only the three genuinely
missing pieces:
- `doctor_addresses.active` / `.timezone`, both NOT NULL with a default so
existing rows need no backfill and no current behaviour changes. `active` is
stored only — applying it to slot calculation is task 03, since touching
`SlotCalculatorService` is off limits in this phase.
- `branch_working_hours`, keyed to `doctor_addresses.id`. Minutes from midnight
rather than "09:00" strings so range intersection stays arithmetic. PUT
replaces all seven days; validation of the whole week runs before any DELETE,
so an invalid sixth day cannot wipe the five valid ones and then answer 422.
- `rooms`, with `capacity` as concurrency (a three-bed injection room is one
resource with capacity 3, not three resources) and a deletion-guard iterator
so tasks 02 and 07 can add reasons without editing RoomService.
`BranchWorkingHours` first registered as an aggregate child of `DoctorAddress`;
TenantSchemaCoverageTest rejected it correctly, because that root is itself
declared global. It now carries a real tenant pair instead, derived in the
constructor from the address's `type` — a total mapping, and the address is only
ever listed in its own context, so nothing is hidden wrongly.
RoomController checks ownership explicitly rather than trusting TenantFilter:
hard isolation only applies to a *chosen* context, so a doctor who had not
selected one could PATCH another clinic's room. Caught by
RoomCrudTest::testForeignRoomIsNotFound, which failed with 200 before the fix.
35 tests, 97 assertions. Slot-mode frozen contract still green.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Appointment gains:
- replaceServiceItems(): full replacement that unconditionally syncs the
legacy single serviceItem column. addServiceItem() only fills it when null,
which would leave stale service names in the four consumers that read
service_item (admin lists, public site, desktop app).
- currentServiceUuids(): input-order uuids, falling back to the single column
for appointments created before multi-service support.
- service_total_minutes / service_buffer_minutes (both nullable, NULL in slot
mode). slot_end - slot_start carries the number but cannot say whether it
was intentional, and a reserve entry has slot_start == slot_end so its
duration had nowhere to live.
Existing columns untouched: slot_start, slot_end, active_slot_key, is_reserve
verified unchanged via SHOW COLUMNS.
Task: docs/new_feture/taskes/task-00-service-mode-completion/
Slot-mode contract: unchanged (--group=slot-mode-frozen green)
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- Implemented SidebarStaff component tests to ensure staff users see only their dashboard and services.
- Created StaffMyServicesPage to display assigned services for staff users.
- Added migration to link clinic staff rows to user accounts for ROLE_STAFF access.
- Defined StaffPermissions class for static permissions related to staff role.
- Introduced StaffRouteGuardSubscriber to restrict API access for staff users.
- Developed StaffAccountService for managing staff user accounts and linking them to clinic staff.
- Added comprehensive tests for StaffAccountService to validate user creation, mobile number handling, and account attachment.
- Implemented tests for staff dashboard access to ensure proper permissions and access control.
- Created tests for staff login context to verify correct environment visibility based on user roles.
- Updated CoverageRule and related entities to include franchise_percent instead of franchise_rials.
- Modified Appointment entity to carry supplementary insurance ID alongside base insurance.
- Implemented SessionBillingService to ensure finalized invoices for insured patient sessions.
- Created InvoiceFinalized event to trigger claims creation upon invoice finalization.
- Added BackfillMissingClaimsCommand to generate claims for finalized invoices without existing claims.
- Developed tests to validate the new functionality for supplementary insurance handling in appointments and claims.
- Changed franchise_rials to franchise_percent in tenant_insurances and tenant_service_coverage tables.
- Reset old rial values to 0/NULL as they are not convertible to percentage.
feat(command): add SeedInsuranceScenarioCommand for seeding insurance data
- Implemented a command to seed supplementary insurance contracts, patients, and claims for a specified doctor.
- Includes functionality for purging existing scenario data and generating new entries with predefined contracts and patient scenarios.
Phase 7 concluded that aggregate children needed no column of their own,
because every repository query anchors to its root. That was true of the
repositories, and it missed the case where the anchor never happens:
$item = $this->serviceItemRepo->findByUuid($data['service_item_uuid']);
A lookup by uuid is itself an unanchored query, and TenantFilter cannot help
when the table has no column to filter on. All three leaks phase 7 found had
exactly this shape, including the one that put another environment's service
price on a patient's invoice.
Measuring which children are actually loaded that way gives eight of the
twenty-five — service_items (15 call sites), patient_sessions (7),
session_payments, patient_notes, patient_calls, patient_messages,
patient_attachments, patient_medical_records. They now carry their own pair
and leave AGGREGATE_CHILDREN; the other seventeen are only ever traversed
from their root and stay as they were.
The pair is derived from the root inside the constructor rather than passed
in, so no creation site can forget it and the value has one source. A root
never changes environment, so the copy is written once and cannot drift.
This is defence at the data layer rather than at the entry point: a forgotten
guard now returns nothing instead of another environment's row. The existing
TenantOwnershipChecker guards stay as the outer layer.
Verified against an imported production database: 8 tables backfilled, zero
rows unmatched, zero rows inconsistent with their root. Dropping the column
again turns the leak test red.
Tests: 911 backend (+5). PHPStan unchanged at 17.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
ownsRecord guards the patient record, not the rows underneath it, so
GET /api/v1/patient/{uuid}/wallet/transactions — and the recent_transactions
in the balance summary — returned the patient's entire history. Clinic A
could read what the patient paid at clinic B, down to the name of the staff
member who entered it.
The wallet stays the person's: the balance is still the sum of that user's
credits minus debits across every environment. Scoping it would show a
patient part of their own money and would make the running balance_after
meaningless. So this is attribution per row, not ownership per wallet.
The columns are deliberately named recorded_entity_type / recorded_entity_id
rather than entity_type / entity_id. TenantFilter keys on the latter and
would then scope the balance query too — the exact bug this avoids. The
naming is load-bearing, and both the entity and the architecture doc say so.
Rows that cannot be attributed — entered before this split, or outside any
environment such as a representation's commission — stay NULL and remain
visible everywhere; hiding them would make an existing patient's history
look deleted. The migration reports how many there are (0 in dev, all
attributable from payments and session references).
Consequence, documented in both docs/api/patient.md and the wallet tab: the
listed rows no longer sum to the displayed balance.
Removing the fix turns 3 of the 6 new tests red.
Tests: 902 backend (+6), 570 frontend. PHPStan unchanged at 17.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Phase 6 of the tenant series. GlobalTables::DEFERRED is now empty and the
coverage test asserts it stays that way.
payments carries the (entity_type, entity_id) pair and belongs to the
receiving side, never the payer: an appointment payment takes the
appointment's environment, a subscription takes the environment its buyer
owns, and an SMS wallet top-up takes the wallet's. The patient never chose
an environment, so TenantFilter stays off for them and they still see their
own payment.
Three corrections to the analysis the phase was planned on, each backed by
the code or the data rather than the plan:
- A third payment type exists. Payment::TYPE_SMS_WALLET is created in
SmsWalletController and already carries its environment in the metadata;
without assigning it the write would fail at flush.
- clinic_subscriptions has no user_id, and its trial rows carry no payment,
so it cannot drive the subscription backfill. The environment is derived
the way handleSubscriptionActivation derives it — and that method now
reads the pair off the payment instead of re-deriving it, so a payment and
the subscription it buys can no longer land on different environments.
- WalletTransaction is not a child of Payment. payment_id is nullable and
none of the four creation sites set it; the wallet is a person's, with a
running balance per user. It and Settlement, which withdraws from that same
wallet, are global with a recorded reason instead.
bank_accounts and pos_devices move from the registering user to the
environment. Their pair is deliberately nullable: nothing in the existing
data says which of a multi-environment owner's cards belongs where, and
guessing would point real money at the wrong account. Ambiguous rows stay
unassigned and the migration reports how many. The cost is that such a row
is invisible in every environment, so the owner reaches it through a
user-scoped lookup that runs outside the filter, and assigns it with
PATCH .../{uuid}/environment. The admin panel marks those rows and offers
the assignment.
Tests: 896 backend (+11), 570 frontend (+4). PHPStan unchanged at its 17
pre-existing errors.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Phase 3 of the tenant-marking series. The same concept was written four ways,
and the Doctrine filter arriving in phase 4 keys on the field name — so the
tables using a different spelling would have been skipped silently, which is
exactly the leak this work exists to prevent.
- discount_rules: owner_type/owner_id renamed to entity_type/entity_id. Pure
rename, no data moves.
- doctor_secretaries: owner_type plus a nullable clinic_id replaced by the
shared pair. The environment now comes from the clinic argument alone, so the
inconsistent combination (owner_type='clinic', clinic_id=NULL) can no longer
be constructed, and the redundant constructor parameter is gone.
- user_active_context: added db_type, so resolving an environment is one lookup
instead of "try clinics, then try doctors". Filled from the type already
present in available_contexts.
- entity_type is VARCHAR(10) in all twenty tenant tables; four of them were 20.
Behaviour change, the only one in this series: the doctor_secretaries unique key
went from (doctor_id, secretary_id, owner_type) to (doctor_id, secretary_id,
entity_type, entity_id). With clinic_id outside the key, one secretary could not
be assigned to the same doctor in two clinics — the second row collided on
owner_type='clinic'. The duplicate check in SecretaryController had the same
blind spot and would have rejected the request before the database saw it; both
are fixed together.
Correcting an assumption from the phase-3 plan: mobile_verification_otp.entity_type
really is a tenant pair. NotificationMobileController validates the target against
['doctor','clinic'] and stores that entity's id, so the column was normalised with
the rest rather than treated as unrelated.
TenantOwnedTrait gained assignTenantPair() for callers that resolved the pair as
scalars and hold no entity — building an EntityContext from scalars would produce
one where isClinic() is true but ->clinic is null, breaking consumers silently.
tests/ApiTestCase::createUser now retries on a duplicate mobile. db_test is never
reset and already holds ~38k users, so the 9-digit random draw collided often
enough to fail unrelated tests a few percent of runs.
Tests: 830 passing. PHPStan reports no new errors on the changed files.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Phase 2 of the tenant-marking series. appointments, weekly_schedules and
date_overrides kept their environment implicit in a nullable clinic_id, so
every query that wanted "this environment's rows" had to rebuild
clinic_id IS NULL ? doctor : clinic itself. The two calendar tables also
depended on a MariaDB-only generated column, clinic_key = IFNULL(clinic_id, 0),
purely to make a unique key work across NULLs.
All three now carry the (entity_type, entity_id) pair that service_sections,
patient_records and clinic_staff already use, via a shared TenantOwnedTrait.
The pair is a deliberate denormalisation of clinic_id/doctor_id: the automatic
tenant filter and the tenant-leading indexes both need a real column, and
neither can be built on an IF() expression.
- Unique keys keep doctor_id alongside the pair. A clinic has several doctors
and each has their own schedule, so (entity_type, entity_id) alone would
reject the second doctor.
- clinic_key is gone from both calendar tables.
- appointments gained tenant-leading indexes; EXPLAIN on the panel's list query
now picks idx_appointments_tenant_slot.
Deliberately unchanged, both with the reason already recorded in the code:
active_slot_key stays keyed on doctor + slot, since adding the environment
would let one doctor be booked in their own practice and a clinic at the same
moment. holidays keeps its nullable clinic_id, where NULL means "every
environment" rather than "personal practice" — a meaning the pair cannot carry.
The migration adds the columns nullable, backfills, aborts if any row is left
without an owner, and only then tightens to NOT NULL. It creates each
replacement unique index before dropping the old one, so the tables are never
left unprotected — MariaDB commits implicitly on DDL, so ordering is the only
safety net. It runs its statements through the connection rather than addSql()
because the guard has to sit between the backfill and the NOT NULL change.
Columns are NOT NULL with no default on purpose: a construction site that
forgets assignTenant() fails at flush instead of silently writing entity_id 0,
which the phase 4 filter would then hide from everyone.
Verified on the dev database: 0 rows without a tenant, 0 personal bookings
mismatched against their doctor, 0 clinic bookings mismatched against their
clinic.
Tests: 819 passing (813 + 6 new in BookingTenantTest). PHPStan clean on every
changed file.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- Introduced `online_share_enabled` and `online_share_percent` fields in the `doctor_secretaries` table to manage secretary shares from online appointments.
- Added `bank_account` field in the `profiles` table to store user-level IBANs for settlements.
- Created `secretary_earnings` table to track earnings per secretary from online appointments, including a foreign key relationship with `financial_breakdowns`.
- Implemented `SecretaryEarning` entity and repository for managing secretary earnings.
- Developed `SecretaryShareResolver` service to determine which secretaries earn from online payments.
- Added `UserIbanResolver` service to handle user IBAN retrieval and management.
- Created `HasIbansTrait` for entities to manage IBANs in a JSON format.
- Implemented tests for secretary earnings and API endpoints for managing secretary shares and IBANs.
An appointment can now carry the insurance it is billed with: the service kind
(outpatient/inpatient) and the basic insurance. Confirming it no longer hands the
whole amount to the patient — the visit is split through BillingCalculator with the
coverage percent of that service kind, and the choice travels to the encounter and
the invoice built from it.
The enabled service kinds are a tenant-wide setting (all of that tenant's
insurances share it), so a tenant covering only one kind is never asked which one:
the panel resolves it the same way the server does.
- add tenant_service_category_settings + TenantServiceCategoryService, exposed on
the existing insurance-pricing endpoint (service_categories,
default_service_category); at least one kind must stay enabled
- add appointments.insurance_service_category / insurance_base_id with
AppointmentInsuranceService validating them against the tenant's own settings
and active contracts (basic only), accepted by PATCH and by confirm
- snapshot the kind on patient_sessions and invoices; the visit's coverage rule is
resolved per kind (services keep using their own ServiceItem.service_category)
- lib/insuranceShares becomes the single client-side mirror of BillingCalculator,
shared by the confirm modal, the appointment edit page and the session form
- surface the selection: confirm modal (with live shares), turns timeline chip,
appointment edit page, patient record service card and invoice summary
- the session form shows the insurance block whenever the tenant has an active
contract and prefills the patient's own insurance, so it can be changed
- fix: the confirm modal showed a zero visit price when the appointment had none —
it now falls back to the tenant's free-visit price like the server
- fix: useServiceCategories read one level too shallow, so Persian labels never
arrived and raw enum keys leaked into the contract summary
- fix: BlogsPage test asserted the public blogs endpoint after the page moved to
the admin one
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Base insurance is a percentage-only rule: patient share is now total minus the
base share, and the contract franchise no longer inflates it (franchise stays
meaningful for supplementary contracts only).
Coverage percentages are managed centrally by admin per service category
(outpatient/inpatient, extensible via the ServiceCategory enum). A tenant
contract may override a category, otherwise it follows the admin default live —
changing the central value immediately applies to every contract that did not
override it.
- add ServiceCategory enum + GET /api/v1/service-categories as the single source
of the category list for every client
- add insurance_coverage_defaults (+ GET/PUT admin coverage-defaults endpoints)
and expose coverage_defaults on the insurance list and insurance-pricing
- add tenant_insurance_category_coverage; tenant-insurances accepts optional
category_coverages (needs insurances.update) and returns the effective
percentages with their source
- add service_items.service_category; visits always resolve as outpatient
- drop the reverse-engineered percent from patient_share_rials in MyPatientsPage
and align the client-side BillingCalculator mirror in CreateStep
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- Introduced new SEO fields (meta_title, meta_description, primary_keyword, secondary_keywords, faq, internal_links, external_links, reading_time, canonical_url, og_image) to the Blog entity.
- Added scheduling capability with a scheduled_at field to manage automatic publishing of blog posts.
- Implemented representative ownership through a foreign key representation_id in the Blog entity, allowing representatives to manage their own posts.
- Updated BlogController and RepresentationBlogController to handle new fields and ensure proper data handling for SEO and scheduling.
- Created BlogWriter service to encapsulate the logic for applying SEO and scheduling fields to blog entities.
- Added PublishScheduledBlogsMessage and its handler to manage the publishing of scheduled blogs.
- Implemented ScheduledBlogPublisher service to publish drafts whose scheduled_at has arrived, respecting review status.
- Created migration to update the database schema with new fields and constraints.
- Added tests to ensure the correct functionality of new features, including SEO fields, representative scope, and scheduled publishing.
- Added new fields to the Blog entity: sources, review_status, reviewer, reviewed_at, review_note, and topic_slug.
- Created API endpoints for reviewing blog posts: GET /api/v1/admin/blog/review-queue and POST /api/v1/admin/blog/{uuid}/review.
- Updated BlogController to handle review logic, including approval and rejection of posts.
- Introduced BlogReviewPage component for admin interface to manage blog reviews.
- Added migration to update the database schema for new fields.
- Implemented tests for review queue functionality and review decision handling.
- Introduced a new nullable city_id column in the blogs table to allow scoping of blog posts to specific cities.
- Updated Blog entity to include a ManyToOne relationship with the City entity.
- Enhanced BlogController to handle city_id in the request, allowing filtering of posts by city.
- Modified BlogRepository to support querying published posts based on city_id.
- Added tests to ensure correct behavior for city-scoped and nationwide posts, including creation and updating of posts with city associations.
- Introduced `tracking_number` field in the `claims` table to store the insurance tracking number.
- Created `claim_status_logs` table to maintain a history of status changes for claims, including who made the change and when.
- Implemented `ClaimStatusLog` entity and repository for managing status log entries.
- Updated `ClaimService` to log transitions and handle tracking numbers during claim submissions.
- Added new API endpoint for fetching claims by patient, including detailed claim history and status logs.
- Enhanced frontend with a new `ClaimPatientDetailPage` to display claims and their status history.
- Added tests to ensure correct aggregation of claims and proper handling of status transitions.
- Consolidated the calculation of patient and insurance shares into a single method using BillingCalculator.
- Introduced new fields in PatientSession to store breakdown of insurance shares and patient share.
- Updated the API responses to include the new fields for consistency across payment, invoice, and claims dashboard.
- Added migration to backfill existing sessions with appropriate values for the new fields.
- Implemented tests to ensure the correctness of the new logic and verify that the breakdown sums to the gross total.
- Redesigned the claims dashboard to provide a more user-friendly overview of patient claims and their statuses.
Confirming an appointment was supposed to create the patient's record and its
session, and PatientService already knew how. Only two of the five paths that
confirm an appointment ever called it, and the one that mattered most did not:
a booking paid for online was confirmed inside the payment callback, which
never ran the side-effects. Every Nobat724 booking therefore went unfiled — 7
confirmed appointments in dev had no session at all.
The side-effects now run through AppointmentConfirmationService, which every
path calls: the payment callback, both PATCH endpoints, and panel/admin
bookings. Creating the record can no longer roll back a confirmation or a
payment; a failure is logged and can be repaired with the new
app:appointment:backfill-sessions command.
Two related defects fixed along the way:
- A doctor working at a clinic got two records for one appointment, one under
the doctor and one under the clinic, so a single visit's revenue was counted
twice. The booking context now decides, and it decides once.
- That context was inferred from address_id, falling back to "the doctor's only
clinic" — a guess that files an appointment under the wrong practice now that
schedules are per-context. It is stored as appointments.clinic_id instead.
Panel and admin bookings were left pending forever: nothing confirmed them and
no payment was expected. They are created confirmed.
Repeat confirmations no longer duplicate the session; an archived one still
counts as filed, so archiving a mistaken visit does not resurrect it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Introduced clinic_id to weekly_schedules, date_overrides, and holidays to differentiate between personal and clinic schedules.
- Updated unique constraints and indexes to accommodate the new clinic context.
feat(command): create AssignScheduleClinicCommand to move schedules
- Added a command to move a doctor's personal weekly schedule into a clinic context.
- Implemented checks to ensure sessions align with the target clinic.
feat(context): implement EntityContext and EntityContextResolver
- Created EntityContext to represent the effective working environment of a request (doctor or clinic).
- Developed EntityContextResolver to determine the execution context based on user roles and active contexts.
test: add ServiceModeContextTest for appointment scheduling
- Implemented tests to ensure service booking respects clinic and personal contexts.
- Verified that financial data is omitted in clinic contexts in InvitedDoctorDashboardScopeTest.
- Introduced `consumables` field in `ServiceItem` to allow multiple individual items alongside inventory packages.
- Created `ServiceItemConsumable` entity to manage individual consumable items linked to a service.
- Updated `ServiceItemController` to handle CRUD operations for consumables.
- Enhanced `ServiceDetailPage` and `ServiceItemFormModal` to display and manage consumables.
- Added tests to ensure functionality for adding, updating, and validating consumables.
- Updated API documentation to reflect changes in service item structure and consumables.
- Added `inventory_package_uuid` and `inventory_package_title` fields to the `ServiceItem` interface.
- Updated API documentation to reflect new fields in service item responses.
- Implemented methods in `ClinicServiceController` to handle inventory package associations.
- Created `ServiceItemAuditLog` entity and repository for tracking changes to service items.
- Added functionality to log changes to service items, including inventory package associations.
- Implemented tests for attaching/detaching inventory packages and auditing changes.
- Created database migrations for new fields and audit log table.
- Implement DoctorPermissionsModal for managing doctor permissions in clinics.
- Create usePermissions hook to handle user permissions context.
- Add migration for clinic_doctor_permissions table with default permissions.
- Develop ClinicDoctorPermissionController for handling permissions API.
- Create ClinicDoctorPermission entity to manage permissions data.
- Implement ClinicDoctorPermissionRepository for database interactions.
- Add ClinicDoctorPermissionChecker for permission validation logic.
- Write tests for clinic doctor permissions functionality.
New SessionAuditLog (mirrors AppointmentEvent): session FK, field, operation
(create/update/delete), old_value/new_value, actor id+name, note, created_at.
Repository saves and lists a session's history (newest first, array hydration).
Migration creates the table.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Add archived + archived_at columns to PatientSession (setArchived stamps the
time). findByRecord/countByRecord accept an archived filter (default all to
keep existing callers, incl. the discount visit-count, unchanged); the
sessions GET reads ?filter=active|all|archived, defaulting to active so
archived visits are hidden. updateSession accepts { archived }. Records are
kept, only hidden. Verified end-to-end; docs updated.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Switch rule target references from int ids to uuids (frontend-friendly; the
engine compares uuids directly) via a migration. Add a Discount Management
tab to the subscription page with a full CRUD UI (DiscountTab): table + modal
form with per-type dynamic target fields (tenant tag / service cascade /
amount / visit count / specific patient / occasion + validity window),
priority and combinable/active toggles. Verified TSC + build.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
New Discount domain: DiscountRule (generic per-tenant rule with 6 types,
priority, combinable, validity window, and per-type target fields) plus its
repository. PatientSession gains applied_discount_rule_id/label audit columns
and setDiscount() now records the source rule. Migration creates the table
and columns.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Introduce the first per-appointment event system. On cancel (via the status
or general update endpoints) an AppointmentEvent (type=cancelled, «نوبت لغو
شد») is recorded with the actor, cancel time, and an optional cancel_reason,
plus a warning-level app_log entry. New GET /appointment/{uuid}/events
returns the ordered event list. The admin appointment detail page renders a
Timeline section and the cancel dialog now collects an optional reason.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Introduced a new boolean flag `require_visit_price` in the `EntityInsurancePricing` to enforce visit price for appointments.
- Updated the appointment creation endpoints to validate `visit_price_rials` based on the new flag.
- Added `visit_price_rials` field to the `Appointment` entity to store the visit price.
- Enhanced the `PatientService` to validate visit price during session creation.
- Updated API documentation to reflect changes in appointment and insurance pricing.
- Implemented a new service `VisitPriceRequirementResolver` to determine if a visit price is required for a doctor based on their pricing settings.
- Added migrations to update the database schema for the new fields.
Backend:
- Add session_at and inventory_package_id to patient_sessions, new
session_consumables table (migration Version20260716102537)
- New SessionConsumable entity/repository mirroring SessionService;
price snapshot, quantity >= 1, tenant-scoped silent skip
- PatientService::createSession accepts session_at, consumables[] and
inventory_package_uuid; consumables are fully patient-paid (no
insurance coverage) and added to final_price_rials
- Functional tests: success, foreign-tenant/unknown skip, empty and
zero-quantity edges (tests/Patient/SessionConsumableTest.php)
- docs/api/patient.md updated for the new Create Session fields
Frontend (admin):
- NewSessionPage rewritten as the tauri /files/create-service 3-step
wizard (ایجاد سرویس ← پرداخت ← جزییات) using SessionStepper
- New CreateStep: acceptance date/time (Jalali), section/service/staff,
consumables with counters, package select, conditional insurance
block (insured service or insured patient profile), price summary
- PaymentStep/DetailsStep extracted from SessionPaymentPage and shared
between both pages (behavior unchanged, tests still green)
- UserTick and FilesServiceAddCard icons ported verbatim from tauri
- Vitest coverage for the wizard incl. empty-data states
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Port the tauri /files/create-service page (payment mode) to the admin SPA
and back it with real multi-part session settlement:
Backend:
- New SessionPayment entity (session_payments table): partial payments
per session with method (wallet/pos/cash/card), amount, paid_at, actor
- PatientSession: settlement discount (percent/fixed), discount_rials,
paid_at, payments relation; remaining debt derived from
final - discount - paid total
- POST /api/v1/session/{uuid}/payments: register a partial payment;
wallet method debits the patient wallet; zero remaining marks paid
- PATCH /api/v1/session/{uuid}: accepts discount_type/discount_value
(null removes) and paid_at, backward compatible
- New error codes: ERR_SESSION_PAYMENT_INVALID/_EXCEEDS,
ERR_SESSION_DISCOUNT_INVALID
- Migration + 14 functional tests (partial/full/wallet/exceed/discount)
Frontend (admin):
- SessionPaymentPage: two-step stepper (پرداخت ← جزییات) ported from
tauri AddService payment mode — service cost, settlement discount
input, Jalali payment date, wallet balance, 4-method payment accordion,
paid-list box, details summary
- SessionStepper + stepper/payment icons ported verbatim from tauri SVGs
- «تکمیل پرداخت» on SessionServiceCard now navigates to the payment page
(replaces the small settle modal on PatientDetailPage)
- Routes for patients/ and my-patients/ variants; vitest coverage
- docs/api/patient.md updated
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Port the tauri AddNoteModal notes feature into the admin patient case-file,
replacing the mislabeled «پیامها» (SMS log) tab with «یادداشتها».
Backend (src/Patient):
- PatientNote entity + repository (record-scoped, pinned-first ordering)
- CRUD endpoints on PatientController: GET /notes, POST /note,
PATCH /note/{uuid} (edit body + toggle pin), DELETE /note/{uuid}
- author display name captured server-side from the current user
- migration for patient_notes; docs/api/patient.md updated
Frontend (assets/admin):
- NotesTab: compose box, newest/oldest sort, pinned-first list with
accent rail + pin/edit/delete, edit modal, confirm-delete, empty state
- tab key/label/icon messages -> notes; onAddNote deep-links the notes tab
Tests: PatientNoteTest (create/list-order/edit/pin/delete/validation/ownership),
PatientDetailPage notes cases (render/empty/pin/create).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Address wallet feedback: use the clinic's real payment infrastructure,
redesign the tab to match the admin panel, and make every wallet movement
fully auditable.
Backend:
- WalletTransaction: add createdBy (acting user) + createdByName, payment_method,
reference, status; toArray exposes them (migration Version20260716083939).
- WalletService (Settlement): balance/charge/withdraw + settleSessionFromWallet,
records actor/method/reason; insufficient balance throws ERR_WALLET_INSUFFICIENT.
- PatientController: charge/withdraw delegate to WalletService and accept
payment_method/reference; PATCH /session/{uuid} with payment_method=wallet
debits the patient's final share from the wallet (reference=session:{uuid}).
- docs/api/patient.md updated.
Frontend:
- Wallet modal redesigned to panel style (no gradient); payment method now uses
the clinic's real bank accounts + POS devices (usePaymentMethods) plus cash.
- Wallet tab: panel balance card + DataTable ledger with columns مبلغ/نوع/روش/
دلیل/ثبتکننده/تاریخ/ساعت/وضعیت + همه/واریزی/برداشت filters.
- Session card «تکمیل پرداخت» opens a payment-method chooser incl. کیف پول.
Tests: backend transparency + session-from-wallet (success/insufficient/cash);
frontend modal (real methods, toman→rials) + wallet tab + settle chooser.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Appointments could only reference a single service (ManyToOne). Add an
appointment_service_items join table (ManyToMany) so an appointment can
carry several services; the first stays the primary service_item for
backward compatibility, and toArray now also returns service_items[].
Both create endpoints (my/appointment, admin/appointment) accept
service_item_uuids[] and attach all of them. A new duration_from_services
flag gates the slot_end recompute: service-booking mode sends it true
(slot_end = start + Σ durations); slot mode omits it so the manual end
time is preserved. The admin endpoint previously ignored services entirely.
Frontend: in slot mode the single service dropdown becomes a checkbox list
filtered by the selected section (multi-select); service mode sends the
duration flag. Migration + backend/entity tests + docs updated.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Introduced a new booking mode in WeeklySchedule to support service-based appointments.
- Updated SlotCalculatorService to calculate available start times based on selected service durations and buffer times.
- Enhanced AppointmentController to handle service items during booking, calculating slot_end on the server side.
- Implemented validation to ensure at least one bookable service exists for doctors in service mode.
- Added new API endpoint to retrieve available appointment slots based on selected services.
- Updated MyAppointmentsController to accept service items during appointment creation.
- Modified ServiceItem entity to include a bookable flag, allowing services to be marked for scheduling.
- Created migration to add bookable column to service_items table.
- Added tests for service-based slot calculations and validation logic.
- Added a new 'category' field to the InventoryItem entity and updated the database schema.
- Replaced free-text input for 'unit' and 'category' with select dropdowns in the AddItemModal.
- Introduced a new API endpoint to fetch metadata for units and categories.
- Updated inventory filtering logic to use the new 'category' field instead of 'consumable'.
- Enhanced validation for item creation and updates to ensure valid unit and category values.
- Updated tests to cover new functionality and ensure proper validation.
